 |
RED-ARROW YH-11S
RED-ARROW
| Model | RED-ARROW YH-11S (YH-N11S) |
| Gun Type | Standard Tagging Gun |
| Compatible Pins | Tag pins / hook pin / circle hooks / double pin (for pins with 1mm diameter) |
| Needle Length | 3 cm |
| Needle Hole Diameter | 1.8 mm |
| Pin Strip Format | Traditional 50/row and fine pitch 100/row / 125/row |
| Recommended Industries | Clothing, shoes & hats, towels, socks, toys, washing products, jewelry |
Notes for buyers: This model is designed for tag pins with 1mm diameter. If your pins are micro extra-fine, please choose a micro extra fine gun/pin system to avoid misfires and fabric damage.
RED-ARROW YH-11S with steel needle
Best for continuous use in factories and warehouses where the gun may face higher daily cycles.
•Needle: Standard steel needle
•Needle length: 3 cm
•Needle hole: 1.8 mm
•Pins: For tag pins with 1mm diameter; supports 50/row and 100/125 row formats
RED-ARROW YH-11S with plastic needle
Preferred by users who want a lighter feel and safer handling in retail or mixed-workforce environments.
•Needle: Standard plastic needle
•Needle length: 3 cm
•Needle hole: 1.8 mm
•Pins: For tag pins with 1mm diameter; supports 50/row and 100/125 row formats
For best feeding stability and lower downtime, match this gun with the correct pin type and strip format:
•Standard tag pins
•Hook pins
•Ring/circle hook pins
•Double pins
•Fast labeling for high-volume operations — efficient trigger action for long shifts.
•Stable feeding for common pin strips — supports 50/row as well as 100/125 row formats.
•Precise penetration control — designed to tag without excessive fabric snagging when used correctly.
•Two needle options — choose steel or plastic needle to match your workflow.
The RED-ARROW YH-11S is suitable for attaching hang tags and labels on:
•Clothing and garments (shirts, pants, knitwear, workwear)
•Shoes & hats accessories
•Towels and socks
•Soft toys and daily-use textiles
•Washing products and jewelry packaging labeling
•Tag on seams, inner labels, or thicker structural areas when possible to reduce visible marks.
•Confirm pin diameter is 1mm and the strip format matches (50/row or 100/125 row).
•Do not force the needle through overly thick multi-layer seams—use the correct pin length and angle.
•Replace bent needles immediately to prevent misfires and fabric snags.
It works with tag pins, hook pins, circle hooks and double pins designed for 1mm pin diameter, and supports both 50/row and 100/125 row strip formats.
This model uses a standard needle with 3 cm length and 1.8 mm needle hole diameter.
Choose steel needle for heavy daily cycles and factory usage. Choose plastic needle when you want safer handling and a lighter feel for retail/backroom tagging.
For delicate fabrics, always tag on seams/labels where possible. If your application needs micro extra-fine pins/needles, use a micro extra-fine system instead of forcing standard pins.
Tell us your required configuration: YH-11S steel needle or YH-11S plastic needle, plus your pin type and pin strip format (50/row or 100/125 row). We’ll confirm compatibility and send a fast quotation.
•Email: sales@hanzeltd.com
•WhatsApp: +86-13930137925
| Model | RED-ARROW YH-11S (YH-N11S) |
| Gun Type | Standard Tagging Gun |
| Compatible Pins | Tag pins / hook pin / circle hooks / double pin (for pins with 1mm diameter) |
| Needle Length | 3 cm |
| Needle Hole Diameter | 1.8 mm |
| Pin Strip Format | Traditional 50/row and fine pitch 100/row / 125/row |
| Recommended Industries | Clothing, shoes & hats, towels, socks, toys, washing products, jewelry |
Notes for buyers: This model is designed for tag pins with 1mm diameter. If your pins are micro extra-fine, please choose a micro extra fine gun/pin system to avoid misfires and fabric damage.
RED-ARROW YH-11S with steel needle
Best for continuous use in factories and warehouses where the gun may face higher daily cycles.
•Needle: Standard steel needle
•Needle length: 3 cm
•Needle hole: 1.8 mm
•Pins: For tag pins with 1mm diameter; supports 50/row and 100/125 row formats
RED-ARROW YH-11S with plastic needle
Preferred by users who want a lighter feel and safer handling in retail or mixed-workforce environments.
•Needle: Standard plastic needle
•Needle length: 3 cm
•Needle hole: 1.8 mm
•Pins: For tag pins with 1mm diameter; supports 50/row and 100/125 row formats
For best feeding stability and lower downtime, match this gun with the correct pin type and strip format:
•Standard tag pins
•Hook pins
•Ring/circle hook pins
•Double pins
•Fast labeling for high-volume operations — efficient trigger action for long shifts.
•Stable feeding for common pin strips — supports 50/row as well as 100/125 row formats.
•Precise penetration control — designed to tag without excessive fabric snagging when used correctly.
•Two needle options — choose steel or plastic needle to match your workflow.
The RED-ARROW YH-11S is suitable for attaching hang tags and labels on:
•Clothing and garments (shirts, pants, knitwear, workwear)
•Shoes & hats accessories
•Towels and socks
•Soft toys and daily-use textiles
•Washing products and jewelry packaging labeling
•Tag on seams, inner labels, or thicker structural areas when possible to reduce visible marks.
•Confirm pin diameter is 1mm and the strip format matches (50/row or 100/125 row).
•Do not force the needle through overly thick multi-layer seams—use the correct pin length and angle.
•Replace bent needles immediately to prevent misfires and fabric snags.
It works with tag pins, hook pins, circle hooks and double pins designed for 1mm pin diameter, and supports both 50/row and 100/125 row strip formats.
This model uses a standard needle with 3 cm length and 1.8 mm needle hole diameter.
Choose steel needle for heavy daily cycles and factory usage. Choose plastic needle when you want safer handling and a lighter feel for retail/backroom tagging.
For delicate fabrics, always tag on seams/labels where possible. If your application needs micro extra-fine pins/needles, use a micro extra-fine system instead of forcing standard pins.
Tell us your required configuration: YH-11S steel needle or YH-11S plastic needle, plus your pin type and pin strip format (50/row or 100/125 row). We’ll confirm compatibility and send a fast quotation.
•Email: sales@hanzeltd.com
•WhatsApp: +86-13930137925
