20" Screen Printing Pallet Platen Tape

Screen Printing Pallet Tape For Platen Masking 

HANZE LTD provide premium self-adhesive platen tape for use on print surfaces of textile screen  print equipment.  It is constructed with white translucent saturated paper and water-based natural rubber  adhesive, which is designed specifically as the protector for textile printing pallets from  ink spills, leaks, spray adhesives...Extends pallet life eliminates the need for cleaning  solvents and reduces downtime for platen clean-up. If you're using a platen tape on your  press, simply pull off the tape after a job and your pallet is clean.  Premium platen tape also works on manual and other automatic platens. Adheres to  either steel, aluminum or wood pallets.

Features:

A smooth paper tape with heat resistant adhesive

A self adhesive tape that easily applied

Easy removable, no adhesive residue

Reduce pallet cleap-up time by 75%

Extend the life of your platen

Description:

1. Adhesion (g/25mm): 400-700
2. Base Weight (g/㎡): 70±3
3. Width (mm): 410
4. Length (m): 100
5. Storing(Months): 12
6. Tensile strength(kg/cm): Horizontal≥3.0;Vertical≥4.0
7. Tear strength(mN): Horizontal≥600; Vertical≥500

Common Specification:

Width in Inch:12",14",16",18",20",22",24",26",28",30",32"...Max 48" or 52"

Width in centimeter:35 cm,40cm,45 cm,50 cm,55 cm,60 cm,65 cm,70 cm....Max 120 cm or 1320 mm

Roll Length:50 meters per roll,100 meters per roll,100 yards per roll

For other special specifications can provide cutting

Using process:

1.Make sure the platens are clean before applying the platen masking tape.
2.Apply the tape from the back with the sticky side down. Cut at the top of the platen.
3.Use the tape role or squeegee to slowly stick the tape to the platen ensuring there are no air bubbles. If you get an air bubble you can pull off and do again.
4.Use a sharp knife to poke a hole in any remaining air bubbles and press down to smooth out.
5.Mark on the tape before apply your adhesive spray.
6.Just remove the tape and it keeps your platen always clean.

Storage conditions:

Do not transport store with volatile organic solvent, avoid direct sunlight,rain.It should be stored at a temperature of 10℃ to 30℃ and a humidity of 40% to 70%. Buy for the best performance within 6 months after purchase. The platen mask should be placed.

Applications:

•Textile printing: T-shirts, fleece, performance wear (all common fabrics)

•High-volume shops: Fast job changeovers with minimal clean-up

•Training/education labs: Protects platens from novice errors and heavy overspray

Ordering & OEM Options

•Bulk cartons & pallet quantities for print shops and distributors

•Custom widths/lengths (OEM slitting) to match your platen fleet

•Private-label available on request

Tell us your platen size, preferred width, and roll length—we'll quote the best option for your line.

FAQs

Q1: Will the tape leave residue on hot platens?
No. It's designed for clean removal, even after flash exposure cycles.

Q2: Can I use spray adhesive on top of the tape?
Yes. Apply your spray adhesive on the tape surface; replace the tape when soiled.

Q3: How often should I change the tape?
Change per job or when contaminated. Frequent changeovers keep prints clean and platens protected.

Q4: Is it suitable for vacuum platens or silicone tops?
Adheres to most standard steel/aluminum/wood platens. Test first on specialty surfaces (e.g., silicone skins).

Q5: What width should I order?
Match or slightly oversize your platen width (e.g., 16" tape for 16" platen) to fully cover edges.