sales@hanzeltd.com   +86-13930137925
Language
You are here: Home » Products » Spot Cleaning Gun » YH-120 Series » Spot Cleaning Gun YH-120B

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Spot Cleaning Gun YH-120B

Availability:
  • RED ARROW YH-120b

Textile Cleaning Gun YH-120B

HZ RED ARROW B

YH-120 TEXTILE CLEANING GUN is designed in accordance with vacuum theory with strong function to clean any dirt. When using, the strong pressure will come out directly from high-quality nozzle head, without any air-compressor is needed. The usage is simple and convenient. The results would be better, if you use general cleaning liquid of solvent.


HZ RED ARROW C

B-1-2 Gun Housing

B-3 Electric Drive

B-4 Trigger Switch

B-5 Silicon Steel Plate

B-6 Electric Lead

B-7 Spring Plate

B-8 Volume Control Knob

B-9 Volume Control Spring

B-10 BOLT A

B-11 BOLT B

B-12 Gun Unit Locking Screw

B-13 Pump Cylinder

B-14 Piston

B-15 Piston Spring

B-16 Gun Unit Locking Plate

B-17~19 Delivery Valve Cone

B-20 Flexible Nozzle Head

B-21 CUP

B-22 Suction Pipe

B-23 Pump Unit locking Screw


1. The proper spot removal by “shooting” the dirt out of the dirty subject should be carried out in a circular sweep, working from the outside towards the center.

2. The correct shooting distance from nozzle to the dirty surface is about 5~20cm. Bear in mind that the distance also alters by the density and the thickness of the object (example: fabric).

3. The screw-button at the back side of the gun is used to control the pressure, which is adjusted into a perfect working position by specialized engineer before ex-factory; so it is strongly recommended customer not to adjust it by their self to prevent malfunction of the product.

4. For extending the life of spray gun and not affecting the working efficiency, please maintain your spray gun by just several minutes after using. First, spray out the rest liquid, then take off the piston which near the nozzle head, and drop little nourish oil on it.

5. If the spray gun is out of order, please detach and examine it according to the instruction menu attached. If the reason is oxidization, please remove it by using deoxidization paste, then drop little nourish oil on it. If the reason is damage of parts, we can supply all parts at reasonable price. Please indicate us the part No., we assure you of our best service at all times.


Previous: 
Next: 

Related News

content is empty!

Product Category

Trusted Manufacturer & Supplier 
form China.

ConTact Us

Tel: +86-13930137925
E-mail: sales@hanzeltd.com
Add: Shijiazhuang city, Hebei Province, China

Message

Contact us
Home
Copyright © 2024  Hebei Hanze International Trade Co.,Ltd. All rights reserved. Sitemap